{"metadata": {"source_document": "NJ BMP workbook", "version_year": "undated", "chapter_subchapter": "Worksheet HSG Soil Testing", "citation": "Chapter 12 Soil Testing Worksheets, sheet HSG Soil Testing, cells B2:C20", "topic": "HSG Soil Testing"}, "programmatic_checks": {}, "content_markdown": "# Chapter 12 Soil Testing Worksheets\n\nWorksheet: HSG Soil Testing (visible); populated cells B2:C20.\n\n| Cell | Stored value or cached result | Formula |\n| --- | --- | --- |\n| B2 | HSG Soil Testing Worksheet |  |\n| B3 | Project Name:  |  |\n| B4 | Location:  |  |\n| B6 | Determination of Hydrologic Soil Group Worksheet |  |\n| B7 | Determining No. of Test Pit for HSG |  |\n| F7 |  Requirements |  |\n| B8 | Unknown Mapping Unit No. <br> Code |  |\n| C8 |  Size of Mapping     Unit (acre) |  |\n| D8 | # of Soil Profile       Pit(s) Required |  |\n| E8 | # of Soil Boring(s) Required |  |\n| F8 | 1.  a mapping unit of less than 0.5 acre, a minimum of one soil profile pit and one soil boring shall be conducted within that mapping unit.  <br>  <br> 2. a minimum of one soil profile pit and four soil borings shall be conducted within each soil mapping unit of 0.5 acre or more and less than or equal to 2 acres, as shown on the NRCS Web Soil Survey. <br>  <br> 3. a mapping unit larger than 2 acres within the limits of the overall site, a minimum of one additional soil profile pit and two additional soil borings shall be conducted for each additional 2 acres.  |  |\n| D9 | 1 | =IF(C9<0.5,1, ROUNDDOWN(C9/2, 0)+1) |\n| E9 | 1 | =IF(C9<0.5,1, ROUNDDOWN(C9/2, 0)*2+4) |\n| D10 | 1 | =IF(C10<0.5,1, ROUNDDOWN(C10/2, 0)+1) |\n| E10 | 1 | =IF(C10<0.5,1, ROUNDDOWN(C10/2, 0)*2+4) |\n| D11 | 1 | =IF(C11<0.5,1, ROUNDDOWN(C11/2, 0)+1) |\n| E11 | 1 | =IF(C11<0.5,1, ROUNDDOWN(C11/2, 0)*2+4) |\n| D12 | 1 | =IF(C12<0.5,1, ROUNDDOWN(C12/2, 0)+1) |\n| E12 | 1 | =IF(C12<0.5,1, ROUNDDOWN(C12/2, 0)*2+4) |\n| D13 | 1 | =IF(C13<0.5,1, ROUNDDOWN(C13/2, 0)+1) |\n| E13 | 1 | =IF(C13<0.5,1, ROUNDDOWN(C13/2, 0)*2+4) |\n| D14 | 1 | =IF(C14<0.5,1, ROUNDDOWN(C14/2, 0)+1) |\n| E14 | 1 | =IF(C14<0.5,1, ROUNDDOWN(C14/2, 0)*2+4) |\n| D15 | 1 | =IF(C15<0.5,1, ROUNDDOWN(C15/2, 0)+1) |\n| E15 | 1 | =IF(C15<0.5,1, ROUNDDOWN(C15/2, 0)*2+4) |\n| B17 | Determining Depth of Soil Profile Pit/Boring |  |\n| B18 | Test No. |  |\n| C18 | Existing Grade Elevation (ft) |  |\n| D18 | 40 in. Below      Existing Grade (ft) |  |\n| E18 | SHWT                 Elevation (ft) |  |\n| F18 | Depth of Test         Pit/Boring from          Existing Grade (ft) |  |\n| G18 | Notes |  |\n| B19 | 1 |  |\n| C19 | 11 |  |\n| D19 | 7.66 |  |\n| E19 | - |  |\n| F19 | 7.66 | =IF(C19=\"\",\"\", IF(OR(E19=\"-\", E19=\"\"), D19, IF((C19-E19>2), D19, E19))) |\n| G19 |  | =IF(OR(E19=\"-\",E19=\"\"),\"\", IF((C19-E19<=2),\"SHWT is within 24 inches.  D soil\",\"\")) |\n| B20 | 2 |  |\n| C20 | 9 |  |\n\nSource snapshot; formulas were not evaluated. Blank cached results remain blank."}
{"metadata": {"source_document": "NJ BMP workbook", "version_year": "undated", "chapter_subchapter": "Worksheet HSG Soil Testing", "citation": "Chapter 12 Soil Testing Worksheets, sheet HSG Soil Testing, cells D20:G31", "topic": "HSG Soil Testing"}, "programmatic_checks": {}, "content_markdown": "# Chapter 12 Soil Testing Worksheets\n\nWorksheet: HSG Soil Testing (visible); populated cells D20:G31.\n\n| Cell | Stored value or cached result | Formula |\n| --- | --- | --- |\n| D20 | 5.66 |  |\n| E20 | 7.5 |  |\n| F20 | 7.5 | =IF(C20=\"\",\"\", IF(OR(E20=\"-\", E20=\"\"), D20, IF((C20-E20>2), D20, E20))) |\n| G20 | SHWT is within 24 inches.  D soil | =IF(OR(E20=\"-\",E20=\"\"),\"\", IF((C20-E20<=2),\"SHWT is within 24 inches.  D soil\",\"\")) |\n| B21 | 3 |  |\n| C21 | 9 |  |\n| D21 | 5.66 |  |\n| E21 | 6.5 |  |\n| F21 | 5.66 | =IF(C21=\"\",\"\", IF(OR(E21=\"-\", E21=\"\"), D21, IF((C21-E21>2), D21, E21))) |\n| G21 |  | =IF(OR(E21=\"-\",E21=\"\"),\"\", IF((C21-E21<=2),\"SHWT is within 24 inches.  D soil\",\"\")) |\n| B22 | 4 |  |\n| F22 |  | =IF(C22=\"\",\"\", IF(OR(E22=\"-\", E22=\"\"), D22, IF((C22-E22>2), D22, E22))) |\n| G22 |  | =IF(OR(E22=\"-\",E22=\"\"),\"\", IF((C22-E22<=2),\"SHWT is within 24 inches.  D soil\",\"\")) |\n| B23 | 5 |  |\n| F23 |  | =IF(C23=\"\",\"\", IF(OR(E23=\"-\", E23=\"\"), D23, IF((C23-E23>2), D23, E23))) |\n| G23 |  | =IF(OR(E23=\"-\",E23=\"\"),\"\", IF((C23-E23<=2),\"SHWT is within 24 inches.  D soil\",\"\")) |\n| B24 | 6 |  |\n| F24 |  | =IF(C24=\"\",\"\", IF(OR(E24=\"-\", E24=\"\"), D24, IF((C24-E24>2), D24, E24))) |\n| G24 |  | =IF(OR(E24=\"-\",E24=\"\"),\"\", IF((C24-E24<=2),\"SHWT is within 24 inches.  D soil\",\"\")) |\n| B25 | 7 |  |\n| F25 |  | =IF(C25=\"\",\"\", IF(OR(E25=\"-\", E25=\"\"), D25, IF((C25-E25>2), D25, E25))) |\n| G25 |  | =IF(OR(E25=\"-\",E25=\"\"),\"\", IF((C25-E25<=2),\"SHWT is within 24 inches.  D soil\",\"\")) |\n| B26 | 8 |  |\n| F26 |  | =IF(C26=\"\",\"\", IF(OR(E26=\"-\", E26=\"\"), D26, IF((C26-E26>2), D26, E26))) |\n| G26 |  | =IF(OR(E26=\"-\",E26=\"\"),\"\", IF((C26-E26<=2),\"SHWT is within 24 inches.  D soil\",\"\")) |\n| B27 | 9 |  |\n| F27 |  | =IF(C27=\"\",\"\", IF(OR(E27=\"-\", E27=\"\"), D27, IF((C27-E27>2), D27, E27))) |\n| G27 |  | =IF(OR(E27=\"-\",E27=\"\"),\"\", IF((C27-E27<=2),\"SHWT is within 24 inches.  D soil\",\"\")) |\n| B28 | 10 |  |\n| F28 |  | =IF(C28=\"\",\"\", IF(OR(E28=\"-\", E28=\"\"), D28, IF((C28-E28>2), D28, E28))) |\n| G28 |  | =IF(OR(E28=\"-\",E28=\"\"),\"\", IF((C28-E28<=2),\"SHWT is within 24 inches.  D soil\",\"\")) |\n| B30 | Soil profile pits and soil borings performed for the purpose of determining HSG must extend at least 40 inches below existing grade, except when the SHWT is at a depth of 24 inches or less, the exploration may be terminated before excavation to the depth of 40 inches below existing grade and the soils are classified as HSG D. |  |\n| G31 | Locked_NJDEP_Chapter_12_workbook_March_2024 |  |\n\nSource snapshot; formulas were not evaluated. Blank cached results remain blank."}
{"metadata": {"source_document": "NJ BMP workbook", "version_year": "undated", "chapter_subchapter": "Worksheet Soil Explorations for SW BMPs", "citation": "Chapter 12 Soil Testing Worksheets, sheet Soil Explorations for SW BMPs, cells B2:F13", "topic": "Soil Explorations for SW BMPs"}, "programmatic_checks": {}, "content_markdown": "# Chapter 12 Soil Testing Worksheets\n\nWorksheet: Soil Explorations for SW BMPs (visible); populated cells B2:F13.\n\n| Cell | Stored value or cached result | Formula |\n| --- | --- | --- |\n| B2 | Soil Explorations for Stormwater BMPs |  |\n| B3 | Project Name:  |  |\n| B4 | Location:  |  |\n| B5 | No. of Soil Explorations Required for Stormwater BMPs <br> (Single, Non-GI, Large BMP,  Linear BMP) |  |\n| B6 | Type (select one) |  |\n| C6 |  Size of Infiltration Area  (square feet) |  |\n| D6 | Length of Linear BMP (ft) |  |\n| E6 | # of Soil Profile Pits Required |  |\n| F6 | # of Soil Borings Required |  |\n| B7 | Single BMP |  |\n| C7 | 6500 |  |\n| D7 | -- | =IF(B7 =\"Linear BMP\", \"? ft\",\"--\") |\n| E7 | 2 | =IF(B7=\"Single BMP\",IF(C7<=10000,2,2+ROUNDUP((C7-10000)/10000,0)),IF(B7=\"Linear BMP\",1+ROUNDDOWN((D7-500)/2000,0),\"--\")) |\n| F7 | 0 | =IF(B7=\"Single BMP\",0,IF(B7=\"Linear BMP\",MAX(0,ROUNDUP((D7-500)/500,0)),\"--\")) |\n| B8 | Single BMP |  |\n| C8 | 25600 |  |\n| D8 | -- | =IF(B8 =\"Linear BMP\", \"? ft\",\"--\") |\n| E8 | 4 | =IF(B8=\"Single BMP\",IF(C8<=10000,2,2+ROUNDUP((C8-10000)/10000,0)),IF(B8=\"Linear BMP\",1+ROUNDDOWN((D8-500)/2000,0),\"--\")) |\n| F8 | 0 | =IF(B8=\"Single BMP\",0,IF(B8=\"Linear BMP\",MAX(0,ROUNDUP((D8-500)/500,0)),\"--\")) |\n| B9 | Linear BMP |  |\n| C9 | -- | =IF(B9 =\"Single BMP\", \"? sf\",\"--\") |\n| D9 | 450 |  |\n| E9 | 1 | =IF(B9=\"Single BMP\",IF(C9<=10000,2,2+ROUNDUP((C9-10000)/10000,0)),IF(B9=\"Linear BMP\",1+ROUNDDOWN((D9-500)/2000,0),\"--\")) |\n| F9 | 0 | =IF(B9=\"Single BMP\",0,IF(B9=\"Linear BMP\",MAX(0,ROUNDUP((D9-500)/500,0)),\"--\")) |\n| C10 | -- | =IF(B10 =\"Single BMP\", \"? sf\",\"--\") |\n| D10 | -- | =IF(B10 =\"Linear BMP\", \"? ft\",\"--\") |\n| E10 | -- | =IF(B10=\"Single BMP\",IF(C10<=10000,2,2+ROUNDUP((C10-10000)/10000,0)),IF(B10=\"Linear BMP\",1+ROUNDDOWN((D10-500)/2000,0),\"--\")) |\n| F10 | -- | =IF(B10=\"Single BMP\",0,IF(B10=\"Linear BMP\",MAX(0,ROUNDUP((D10-500)/500,0)),\"--\")) |\n| C11 | -- | =IF(B11 =\"Single BMP\", \"? sf\",\"--\") |\n| D11 | -- | =IF(B11 =\"Linear BMP\", \"? ft\",\"--\") |\n| E11 | -- | =IF(B11=\"Single BMP\",IF(C11<=10000,2,2+ROUNDUP((C11-10000)/10000,0)),IF(B11=\"Linear BMP\",1+ROUNDDOWN((D11-500)/2000,0),\"--\")) |\n| F11 | -- | =IF(B11=\"Single BMP\",0,IF(B11=\"Linear BMP\",MAX(0,ROUNDUP((D11-500)/500,0)),\"--\")) |\n| C12 | -- | =IF(B12 =\"Single BMP\", \"? sf\",\"--\") |\n| D12 | -- | =IF(B12 =\"Linear BMP\", \"? ft\",\"--\") |\n| E12 | -- | =IF(B12=\"Single BMP\",IF(C12<=10000,2,2+ROUNDUP((C12-10000)/10000,0)),IF(B12=\"Linear BMP\",1+ROUNDDOWN((D12-500)/2000,0),\"--\")) |\n| F12 | -- | =IF(B12=\"Single BMP\",0,IF(B12=\"Linear BMP\",MAX(0,ROUNDUP((D12-500)/500,0)),\"--\")) |\n| C13 | -- | =IF(B13 =\"Single BMP\", \"? sf\",\"--\") |\n| D13 | -- | =IF(B13 =\"Linear BMP\", \"? ft\",\"--\") |\n| E13 | -- | =IF(B13=\"Single BMP\",IF(C13<=10000,2,2+ROUNDUP((C13-10000)/10000,0)),IF(B13=\"Linear BMP\",1+ROUNDDOWN((D13-500)/2000,0),\"--\")) |\n| F13 | -- | =IF(B13=\"Single BMP\",0,IF(B13=\"Linear BMP\",MAX(0,ROUNDUP((D13-500)/500,0)),\"--\")) |\n\nSource snapshot; formulas were not evaluated. Blank cached results remain blank."}
{"metadata": {"source_document": "NJ BMP workbook", "version_year": "undated", "chapter_subchapter": "Worksheet Soil Explorations for SW BMPs", "citation": "Chapter 12 Soil Testing Worksheets, sheet Soil Explorations for SW BMPs, cells B15:C27", "topic": "Soil Explorations for SW BMPs"}, "programmatic_checks": {}, "content_markdown": "# Chapter 12 Soil Testing Worksheets\n\nWorksheet: Soil Explorations for SW BMPs (visible); populated cells B15:C27.\n\n| Cell | Stored value or cached result | Formula |\n| --- | --- | --- |\n| B15 | No. of Soil Explorations Required for Stormwater BMPs <br> in accordance with Items 2 and 3 of Subsection 2a in Ch. 12 |  |\n| B16 | Type  (select one) |  |\n| C16 | # of Soil Mapping Unit |  |\n| D16 | # of BMPs |  |\n| E16 | # of Soil Profile Pits Required |  |\n| F16 | # of Soil Borings Required |  |\n| B17 | Small BMPs <= 500 sf |  |\n| C17 | 1 |  |\n| D17 | 5 |  |\n| E17 | 1 | =C17 |\n| F17 | 5 | =IF(B17=\"Small BMPs <= 500 sf\",D17, (IF(B17=\"GI BMPs > 500 sf\",D17*2,\"--\"))) |\n| B18 | GI BMPs > 500 sf |  |\n| C18 | 2 |  |\n| D18 | 9 |  |\n| E18 | 2 | =C18 |\n| F18 | 18 | =IF(B18=\"Small BMPs <= 500 sf\",D18, (IF(B18=\"GI BMPs > 500 sf\",D18*2,\"--\"))) |\n| B19 | Small BMPs <= 500 sf |  |\n| C19 | -- | =IF(B19 =\"Single BMP\", \"? sf\",\"--\") |\n| D19 | -- | =IF(B19 =\"Linear BMP\", \"? ft\",\"--\") |\n| E19 | -- | =C19 |\n| F19 | -- | =IF(B19=\"Small BMPs <= 500 sf\",D19, (IF(B19=\"GI BMPs > 500 sf\",D19*2,\"--\"))) |\n| C20 | -- | =IF(B20 =\"Single BMP\", \"? sf\",\"--\") |\n| D20 | -- | =IF(B20 =\"Linear BMP\", \"? ft\",\"--\") |\n| E20 | -- | =C20 |\n| F20 | -- | =IF(B20=\"Small BMPs <= 500 sf\",D20, (IF(B20=\"GI BMPs > 500 sf\",D20*2,\"--\"))) |\n| C21 | -- | =IF(B21 =\"Single BMP\", \"? sf\",\"--\") |\n| D21 | -- | =IF(B21 =\"Linear BMP\", \"? ft\",\"--\") |\n| E21 | -- | =C21 |\n| F21 | -- | =IF(B21=\"Small BMPs <= 500 sf\",D21, (IF(B21=\"GI BMPs > 500 sf\",D21*2,\"--\"))) |\n| C22 | -- | =IF(B22 =\"Single BMP\", \"? sf\",\"--\") |\n| D22 | -- | =IF(B22 =\"Linear BMP\", \"? ft\",\"--\") |\n| E22 | -- | =C22 |\n| F22 | -- | =IF(B22=\"Small BMPs <= 500 sf\",D22, (IF(B22=\"GI BMPs > 500 sf\",D22*2,\"--\"))) |\n| C23 | -- | =IF(B23 =\"Single BMP\", \"? sf\",\"--\") |\n| D23 | -- | =IF(B23 =\"Linear BMP\", \"? ft\",\"--\") |\n| E23 | -- | =C23 |\n| F23 | -- | =IF(B23=\"Small BMPs <= 500 sf\",D23, (IF(B23=\"GI BMPs > 500 sf\",D23*2,\"--\"))) |\n| B26 | Determining Depth of Soil Profile Pit/Boring |  |\n| B27 | Test Pit / Boring  <br> No. |  |\n| C27 | Existing  <br> Grade  <br> EL. (ft) |  |\n\nSource snapshot; formulas were not evaluated. Blank cached results remain blank."}
{"metadata": {"source_document": "NJ BMP workbook", "version_year": "undated", "chapter_subchapter": "Worksheet Soil Explorations for SW BMPs", "citation": "Chapter 12 Soil Testing Worksheets, sheet Soil Explorations for SW BMPs, cells D27:F40", "topic": "Soil Explorations for SW BMPs"}, "programmatic_checks": {}, "content_markdown": "# Chapter 12 Soil Testing Worksheets\n\nWorksheet: Soil Explorations for SW BMPs (visible); populated cells D27:F40.\n\n| Cell | Stored value or cached result | Formula |\n| --- | --- | --- |\n| D27 | Lowest  <br> Bottom  <br> EL. (ft) |  |\n| E27 | Maximum  <br> Potential  <br> Water Depth  <br> (ft) |  |\n| F27 | Depth of Test Pit/Boring  <br> Depth from  <br> Existing Grade  <br> (in) |  |\n| G27 | Elevation of  <br> Excavation  <br> EL. (ft) |  |\n| B28 | 1 |  |\n| C28 | 100 |  |\n| D28 | 96 |  |\n| E28 | 2 |  |\n| F28 | 144 | =12*IF((C28-D28+8)>2*E28,(C28-D28+8),2*E28) |\n| G28 | 88 | =C28 -IF((C28-D28+8)>2*E28,(C28-D28+8),2*E28) |\n| B29 | 2 |  |\n| F29 | 96 | =12*IF((C29-D29+8)>2*E29,(C29-D29+8),2*E29) |\n| G29 | -8 | =C29 -IF((C29-D29+8)>2*E29,(C29-D29+8),2*E29) |\n| B30 | 3 |  |\n| F30 | 96 | =12*IF((C30-D30+8)>2*E30,(C30-D30+8),2*E30) |\n| G30 | -8 | =C30 -IF((C30-D30+8)>2*E30,(C30-D30+8),2*E30) |\n| B31 | 4 |  |\n| F31 | 96 | =12*IF((C31-D31+8)>2*E31,(C31-D31+8),2*E31) |\n| G31 | -8 | =C31 -IF((C31-D31+8)>2*E31,(C31-D31+8),2*E31) |\n| B32 | 5 |  |\n| F32 | 96 | =12*IF((C32-D32+8)>2*E32,(C32-D32+8),2*E32) |\n| G32 | -8 | =C32 -IF((C32-D32+8)>2*E32,(C32-D32+8),2*E32) |\n| B33 | 6 |  |\n| F33 | 96 | =12*IF((C33-D33+8)>2*E33,(C33-D33+8),2*E33) |\n| G33 | -8 | =C33 -IF((C33-D33+8)>2*E33,(C33-D33+8),2*E33) |\n| B34 | 7 |  |\n| F34 | 96 | =12*IF((C34-D34+8)>2*E34,(C34-D34+8),2*E34) |\n| G34 | -8 | =C34 -IF((C34-D34+8)>2*E34,(C34-D34+8),2*E34) |\n| B35 | 8 |  |\n| F35 | 96 | =12*IF((C35-D35+8)>2*E35,(C35-D35+8),2*E35) |\n| G35 | -8 | =C35 -IF((C35-D35+8)>2*E35,(C35-D35+8),2*E35) |\n| B36 | 9 |  |\n| F36 | 96 | =12*IF((C36-D36+8)>2*E36,(C36-D36+8),2*E36) |\n| G36 | -8 | =C36 -IF((C36-D36+8)>2*E36,(C36-D36+8),2*E36) |\n| B37 | 10 |  |\n| F37 | 96 | =12*IF((C37-D37+8)>2*E37,(C37-D37+8),2*E37) |\n| G37 | -8 | =C37 -IF((C37-D37+8)>2*E37,(C37-D37+8),2*E37) |\n| B39 | Note:  Soil profile pits and soil borings performed for the purpose of designing a stormwater BMP must extend to either a minimum depth of eight feet below the lowest elevation of the basin bottom or to a depth that is at least twice the maximum potential water depth generated by the largest design storm, whichever is greater. |  |\n| F40 | Locked_NJDEP_Chapter_12_workbook_March_2024 |  |\n\nSource snapshot; formulas were not evaluated. Blank cached results remain blank."}
{"metadata": {"source_document": "NJ BMP workbook", "version_year": "undated", "chapter_subchapter": "Worksheet Soil Profile Report", "citation": "Chapter 12 Soil Testing Worksheets, sheet Soil Profile Report, cells B2:D21", "topic": "Soil Profile Report"}, "programmatic_checks": {}, "content_markdown": "# Chapter 12 Soil Testing Worksheets\n\nWorksheet: Soil Profile Report (visible); populated cells B2:D21.\n\n| Cell | Stored value or cached result | Formula |\n| --- | --- | --- |\n| B2 | Soil Profile Report |  |\n| B3 | Project Name: |  |\n| E3 | Municipality: |  |\n| B4 | Project Location: |  |\n| E4 | Block/Lot Info: |  |\n| B6 | Date of Observation of SHWT: |  |\n| E6 | Lowest Point in BMP (ft) = |  |\n| G6 | 5 |  |\n| B7 | Prepared by: |  |\n| E7 | Max Water Depth (ft) = |  |\n| G7 | 2 |  |\n| E8 | Required Soil Profile Pit Depth (ft) = |  |\n| G8 | 13 | =MAX((G6+8),(2*G7)) |\n| B9 | Test Pit No.: |  |\n| E9 | Locating the Seasonal High Water Table, if determined by direct observation, must be performed between January 1 and April 30.  If determined by the soil morphological observation, redoximorphic features must be noted. <br>  <br> Generally, most USDA Soil textual types listed below are arranged from most to least hydraulically restrictive; if unsure of the soil type present, multiple soil layers may need to be tested.  Clay, Clay Loam, Loam, Silty Clay, Silty Clay Loam, Silt Loam, Silt, Sandy Clay, Sandy Clay Loam, Loamy Sand, Sandy Loam, Sand.        |  |\n| B10 | Observation Reported: |  |\n| D10 | Elevation (ft) |  |\n| B11 | Ground Level: |  |\n| D11 | 100 |  |\n| B12 | Seasonal High Water Table: |  |\n| B13 | Pit bottom: |  |\n| D13 | 87 | =D11-G8 |\n| B15 | USDA  <br> Soil Texture <br> (select one) |  |\n| C15 | Check box if most hydraulically restrictive |  |\n| D15 | Top Elevation / <br>  Bottom Elevation (ft) |  |\n| E15 | Direct  <br> Observation  <br> of Water Table  <br> (ft), if any |  |\n| F15 | Soil  <br> Morphological  <br> Observation |  |\n| G15 | Notes |  |\n| C16 | o |  |\n| D16 | / |  |\n| C17 | o |  |\n| D17 | / |  |\n| C18 | o |  |\n| D18 | / |  |\n| C19 | o |  |\n| D19 | / |  |\n| C20 | o |  |\n| D20 | / |  |\n| C21 | o |  |\n| D21 | / |  |\n\nSource snapshot; formulas were not evaluated. Blank cached results remain blank."}
{"metadata": {"source_document": "NJ BMP workbook", "version_year": "undated", "chapter_subchapter": "Worksheet Soil Profile Report", "citation": "Chapter 12 Soil Testing Worksheets, sheet Soil Profile Report, cells C22:H42", "topic": "Soil Profile Report"}, "programmatic_checks": {}, "content_markdown": "# Chapter 12 Soil Testing Worksheets\n\nWorksheet: Soil Profile Report (visible); populated cells C22:H42.\n\n| Cell | Stored value or cached result | Formula |\n| --- | --- | --- |\n| C22 | o |  |\n| D22 | / |  |\n| C23 | o |  |\n| D23 | / |  |\n| C24 | o |  |\n| D24 | / |  |\n| C25 | o |  |\n| D25 | / |  |\n| C26 | o |  |\n| D26 | / |  |\n| C27 | o |  |\n| D27 | / |  |\n| C28 | o |  |\n| D28 | / |  |\n| C29 | o |  |\n| D29 | / |  |\n| C30 | o |  |\n| D30 | / |  |\n| F31 | Locked_NJDEP_Chapter_12_workbook_March_2024 |  |\n| H31 | Clay |  |\n| H32 | Clay Loam |  |\n| H33 | Loam |  |\n| H34 | Silty Clay |  |\n| H35 | Silty Clay Loam |  |\n| H36 | Silt Loam |  |\n| H37 | Silt |  |\n| H38 | Sandy clay |  |\n| H39 | Sandy clay loam |  |\n| H40 | Loamy Sand |  |\n| H41 | Sandy Loam |  |\n| H42 | Sand |  |\n\nSource snapshot; formulas were not evaluated. Blank cached results remain blank."}
{"metadata": {"source_document": "NJ BMP workbook", "version_year": "undated", "chapter_subchapter": "Worksheet Percolation Test", "citation": "Chapter 12 Soil Testing Worksheets, sheet Percolation Test, cells B2:I14", "topic": "Percolation Test"}, "programmatic_checks": {}, "content_markdown": "# Chapter 12 Soil Testing Worksheets\n\nWorksheet: Percolation Test (visible); populated cells B2:I14.\n\n| Cell | Stored value or cached result | Formula |\n| --- | --- | --- |\n| B2 | Percolation Test Data Sheet |  |\n| B3 | Project: |  |\n| G3 | Date: |  |\n| B4 | Municipality: |  |\n| B6 | Test Hole Dimensions |  |\n| B7 | Test Pit # |  |\n| B8 | Test Hole Shape     (select one) |  |\n| C8 | Round |  |\n| D8 | Enter the Diameter (in)           if Round was selected |  |\n| F8 | 6 |  |\n| G8 | Enter Dimensions (in)               if Square or Rectangular was selected |  |\n| I8 | Length |  |\n| I9 | Width |  |\n| B11 | Test Results |  |\n| B12 | Trial No. |  |\n| C12 | Start Time at 6 inches |  |\n| D12 | Stop Time at 0 inch |  |\n| E12 | Time Interval (min) |  |\n| F12 | Initial Water Depth (in) |  |\n| G12 | Final Water Depth (in) |  |\n| H12 | Change in Water Level (in) |  |\n| I12 | Percolation Rate (min/in) |  |\n| J12 | Converted Hydraulic Conductivity (in/hr) |  |\n| B13 | 1 |  |\n| C13 | 0 |  |\n| D13 | 25 |  |\n| E13 | 25 | =D13-C13 |\n| F13 | 6 |  |\n| G13 | 0 |  |\n| H13 | 6 |  |\n| I13 | 4.166666666666667 | =IF((E13<>0),E13/H13,\"\") |\n| J13 | 4.8 | =IF(AND($F$8=\"\", $J$8=\"\"), \"Dimension\", IF(I13<>\"\",IF($C$8=\"Round\",(60*(PI()*($F$8/2)^2)*1/(PI()*($F$8/2)^2+2*PI()*($F$8/2)*(6/2))*(1/I13)),IF($C$8=\"Sq/Rect\",(60*(J$8*J$9)*1/(J$8*J$9+2*(J$8+J$9)*(6/2))*(1/I13)),\"Select test hole type\")),\"\")) |\n| B14 | 2 |  |\n| C14 | 0 |  |\n| D14 | 24 |  |\n| E14 | 24 | =D14-C14 |\n| F14 | 6 |  |\n| G14 | 0 |  |\n| H14 | 6 |  |\n| I14 | 4 | =IF((E14<>0),E14/H14,\"\") |\n\nSource snapshot; formulas were not evaluated. Blank cached results remain blank."}
{"metadata": {"source_document": "NJ BMP workbook", "version_year": "undated", "chapter_subchapter": "Worksheet Percolation Test", "citation": "Chapter 12 Soil Testing Worksheets, sheet Percolation Test, cells J14:F29", "topic": "Percolation Test"}, "programmatic_checks": {}, "content_markdown": "# Chapter 12 Soil Testing Worksheets\n\nWorksheet: Percolation Test (visible); populated cells J14:F29.\n\n| Cell | Stored value or cached result | Formula |\n| --- | --- | --- |\n| J14 | 5 | =IF(AND($F$8=\"\", $J$8=\"\"), \"Dimension\", IF(I14<>\"\",IF($C$8=\"Round\",(60*(PI()*($F$8/2)^2)*1/(PI()*($F$8/2)^2+2*PI()*($F$8/2)*(6/2))*(1/I14)),IF($C$8=\"Sq/Rect\",(60*(J$8*J$9)*1/(J$8*J$9+2*(J$8+J$9)*(6/2))*(1/I14)),\"Select test hole type\")),\"\")) |\n| B15 | 3 |  |\n| E15 | 0 | =D15-C15 |\n| F15 | 6 |  |\n| G15 | 0 |  |\n| H15 | 6 |  |\n| I15 |  | =IF((E15<>0),E15/H15,\"\") |\n| J15 |  | =IF(AND($F$8=\"\", $J$8=\"\"), \"Dimension\", IF(I15<>\"\",IF($C$8=\"Round\",(60*(PI()*($F$8/2)^2)*1/(PI()*($F$8/2)^2+2*PI()*($F$8/2)*(6/2))*(1/I15)),IF($C$8=\"Sq/Rect\",(60*(J$8*J$9)*1/(J$8*J$9+2*(J$8+J$9)*(6/2))*(1/I15)),\"Select test hole type\")),\"\")) |\n| B16 | 4 |  |\n| E16 | 0 | =D16-C16 |\n| F16 | 6 |  |\n| G16 | 0 |  |\n| H16 | 6 |  |\n| I16 |  | =IF((E16<>0),E16/H16,\"\") |\n| J16 |  | =IF(AND($F$8=\"\", $J$8=\"\"), \"Dimension\", IF(I16<>\"\",IF($C$8=\"Round\",(60*(PI()*($F$8/2)^2)*1/(PI()*($F$8/2)^2+2*PI()*($F$8/2)*(6/2))*(1/I16)),IF($C$8=\"Sq/Rect\",(60*(J$8*J$9)*1/(J$8*J$9+2*(J$8+J$9)*(6/2))*(1/I16)),\"Select test hole type\")),\"\")) |\n| B17 | 5 |  |\n| E17 | 0 | =D17-C17 |\n| F17 | 6 |  |\n| G17 | 0 |  |\n| H17 | 6 |  |\n| I17 |  | =IF((E17<>0),E17/H17,\"\") |\n| J17 |  | =IF(AND($F$8=\"\", $J$8=\"\"), \"Dimension\", IF(I17<>\"\",IF($C$8=\"Round\",(60*(PI()*($F$8/2)^2)*1/(PI()*($F$8/2)^2+2*PI()*($F$8/2)*(6/2))*(1/I17)),IF($C$8=\"Sq/Rect\",(60*(J$8*J$9)*1/(J$8*J$9+2*(J$8+J$9)*(6/2))*(1/I17)),\"Select test hole type\")),\"\")) |\n| H19 | Average |  |\n| J19 | 4.9 | =IF(J13<>\"\",SUM(J13:J17)/(5-COUNTBLANK(J13:J17)),\"\") |\n| B23 | Test Hole Dimensions |  |\n| B24 | Test Pit # |  |\n| B25 | Test Hole Shape     (select one) |  |\n| C25 | Sq/Rect |  |\n| D25 | Enter the Diameter (in)                if Round was selected |  |\n| G25 | Enter Dimensions (in)                    if Square or Rectangular was selected |  |\n| I25 | Length |  |\n| J25 | 10 |  |\n| I26 | Width |  |\n| J26 | 10 |  |\n| B28 | Test Results |  |\n| B29 | Trial No. |  |\n| C29 | Start Time at 6 inches |  |\n| D29 | Stop Time at 0 inch |  |\n| E29 | Time Interval (min) |  |\n| F29 | Initial Water Depth (in) |  |\n\nSource snapshot; formulas were not evaluated. Blank cached results remain blank."}
{"metadata": {"source_document": "NJ BMP workbook", "version_year": "undated", "chapter_subchapter": "Worksheet Percolation Test", "citation": "Chapter 12 Soil Testing Worksheets, sheet Percolation Test, cells G29:I34", "topic": "Percolation Test"}, "programmatic_checks": {}, "content_markdown": "# Chapter 12 Soil Testing Worksheets\n\nWorksheet: Percolation Test (visible); populated cells G29:I34.\n\n| Cell | Stored value or cached result | Formula |\n| --- | --- | --- |\n| G29 | Final Water Depth (in) |  |\n| H29 | Change in Water Level (in) |  |\n| I29 | Percolation Rate (min/in) |  |\n| J29 | Converted Hydraulic Conductivity (in/hr) |  |\n| B30 | 1 |  |\n| C30 | 0 |  |\n| D30 | 16 |  |\n| E30 | 16 | =D30-C30 |\n| F30 | 6 |  |\n| G30 | 0 |  |\n| H30 | 6 |  |\n| I30 | 2.6666666666666665 | =IF((E30<>0),E30/H30,\"\") |\n| J30 | 10.227272727272727 | =IF(AND($F$25=\"\", $J$25=\"\"), \"Dimension\", IF(I30<>\"\",IF($C$25=\"Round\",(60*(PI()*($F$25/2)^2)*1/(PI()*($F$25/2)^2+2*PI()*($F$25/2)*(6/2))*(1/I30)),IF($C$25=\"Sq/Rect\",(60*(J$25*J$26)*1/(J$25*J$26+2*(J$25+J$26)*(6/2))*(1/I30)),\"Select test hole type\")),\"\")) |\n| B31 | 2 |  |\n| E31 | 0 | =D31-C31 |\n| F31 | 6 |  |\n| G31 | 0 |  |\n| H31 | 6 |  |\n| I31 |  | =IF((E31<>0),E31/H31,\"\") |\n| J31 |  | =IF(AND($F$25=\"\", $J$25=\"\"), \"Dimension\", IF(I31<>\"\",IF($C$25=\"Round\",(60*(PI()*($F$25/2)^2)*1/(PI()*($F$25/2)^2+2*PI()*($F$25/2)*(6/2))*(1/I31)),IF($C$25=\"Sq/Rect\",(60*(J$25*J$26)*1/(J$25*J$26+2*(J$25+J$26)*(6/2))*(1/I31)),\"Select test hole type\")),\"\")) |\n| B32 | 3 |  |\n| E32 | 0 | =D32-C32 |\n| F32 | 6 |  |\n| G32 | 0 |  |\n| H32 | 6 |  |\n| I32 |  | =IF((E32<>0),E32/H32,\"\") |\n| J32 |  | =IF(AND($F$25=\"\", $J$25=\"\"), \"Dimension\", IF(I32<>\"\",IF($C$25=\"Round\",(60*(PI()*($F$25/2)^2)*1/(PI()*($F$25/2)^2+2*PI()*($F$25/2)*(6/2))*(1/I32)),IF($C$25=\"Sq/Rect\",(60*(J$25*J$26)*1/(J$25*J$26+2*(J$25+J$26)*(6/2))*(1/I32)),\"Select test hole type\")),\"\")) |\n| B33 | 4 |  |\n| E33 | 0 | =D33-C33 |\n| F33 | 6 |  |\n| G33 | 0 |  |\n| H33 | 6 |  |\n| I33 |  | =IF((E33<>0),E33/H33,\"\") |\n| J33 |  | =IF(AND($F$25=\"\", $J$25=\"\"), \"Dimension\", IF(I33<>\"\",IF($C$25=\"Round\",(60*(PI()*($F$25/2)^2)*1/(PI()*($F$25/2)^2+2*PI()*($F$25/2)*(6/2))*(1/I33)),IF($C$25=\"Sq/Rect\",(60*(J$25*J$26)*1/(J$25*J$26+2*(J$25+J$26)*(6/2))*(1/I33)),\"Select test hole type\")),\"\")) |\n| B34 | 5 |  |\n| E34 | 0 | =D34-C34 |\n| F34 | 6 |  |\n| G34 | 0 |  |\n| H34 | 6 |  |\n| I34 |  | =IF((E34<>0),E34/H34,\"\") |\n\nSource snapshot; formulas were not evaluated. Blank cached results remain blank."}
{"metadata": {"source_document": "NJ BMP workbook", "version_year": "undated", "chapter_subchapter": "Worksheet Percolation Test", "citation": "Chapter 12 Soil Testing Worksheets, sheet Percolation Test, cells J34:H38", "topic": "Percolation Test"}, "programmatic_checks": {}, "content_markdown": "# Chapter 12 Soil Testing Worksheets\n\nWorksheet: Percolation Test (visible); populated cells J34:H38.\n\n| Cell | Stored value or cached result | Formula |\n| --- | --- | --- |\n| J34 |  | =IF(AND($F$25=\"\", $J$25=\"\"), \"Dimension\", IF(I34<>\"\",IF($C$25=\"Round\",(60*(PI()*($F$25/2)^2)*1/(PI()*($F$25/2)^2+2*PI()*($F$25/2)*(6/2))*(1/I34)),IF($C$25=\"Sq/Rect\",(60*(J$25*J$26)*1/(J$25*J$26+2*(J$25+J$26)*(6/2))*(1/I34)),\"Select test hole type\")),\"\")) |\n| H36 | Average |  |\n| J36 | 10.227272727272727 | =IF(J30<>\"\",SUM(J30:J34)/(5-COUNTBLANK(J30:J34)),\"\") |\n| H38 | Locked_NJDEP_Chapter_12_workbook_March_2024 |  |\n\nSource snapshot; formulas were not evaluated. Blank cached results remain blank."}